Ford Mustang (1999-2004) Service Manual: Negative and Positive Camber

Negative and Positive Camber

Camber is the vertical tilt of the wheel (1007) when viewed from the front. Camber can be positive or negative and has a direct effect on tire wear.

Caster

Caster

Item Part Number Description
1 - Positive caster
2 - True vertical
3 - Steering axis

Caster is the deviation from vertical of an imaginary line drawn through the ball joints when viewed from the side. Caster specifications in this section will give the vehicle the best directional stability characteristics when loaded and driven. Caster setting is not related to tire wear.

Toe

Positive Toe (Toe In)

Positive Toe (Toe In)

Negative Toe (Toe Out)

Negative Toe (Toe Out)

The vehicle toe setting affects tire wear and directional stability.

Ride Height

Front Ride Height Measurement

Front Ride Height Measurement

Item Description
1 Ride height = B - A
2 Measurement A
3 Measurement B
    Wheel Alignment Angles
    Camber and toe are adjustable on the front suspension systems. Front camber is adjusted by moving the top of the strut and spring assembly. Rear camber is adjusted by means of eccentric cams on the ...

    Rear Ride Height Measurement - GT and Base
    Item Description 1 Body reinforcement 2 Ride height (shortest distance) 3 Rear axle Wheel Track Item Part Number Description 1 - Front track ...

    Other materials:

    Communications Network (Diagnosis and Testing)
    Refer to Wiring Diagrams Cell 14 , Multiplex Communication Network for schematic and connector information. Special Tool(s) 73 Digital Multimeter or equivalent 105-R0051 Worldwide Diagnostic System (WDS) 418-F224, New Genera ...

    Reverse Clutch
    Special Tool(s) Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C) Compressor, Clutch Spring 307-015 (T65L-77515-A) Protector, Transmission Reverse Clutch Outer Fluid Seal 307-424 Protecto ...

    Removal
    1. Remove the air intake scoop bracket. For additonal information, refer to Section. 2. Remove the air cleaner outlet tube. For additional information, refer to Section. 3. Disconnect the accelerator cable, the speed control actuator cable and the return ...