Ford Mustang (1999-2004) Service Manual: Oil Level Indicator and Tube
Removal and Installation
1. Remove the oil level indicator tube (6754).
- Remove the bolt.
- Remove the oil level indicator tube.
- Remove and discard the oil level indicator tube O-ring.
2. To install, reverse the removal procedure.
Installation
NOTE: Do not use a fiber disc to clean the surfaces. Fibers from the disc can get into the oil pan and oil and clog the oil bypass valve. 1. Clean and inspect the cylinder head for flatness. 2. ...Oil Pan
Special Tool(s) 3 Bar Engine Support Kit 303-F072 Lifting Bracket Set, Engine 303-D095 (D94L-6001-A) or equivalent Material ...Other materials:
Assembly
1. Lubricate the differential side gear thrust washers and the differential
side gear journals, and
assemble the washers to the gears.
Use SAE 80W-90 Premium Rear Axle Lubricant XY-80W90-QL or equivalent
meeting
Ford specification WSP-M2C197-A.
2. Lub ...
Anti-theft system
The active anti-theft system is designed to warn you in the event of
unauthorized vehicle entry and is also designed to help prevent
unwanted towing of the vehicle.
You can choose what is monitored by arming the system in different
ways.
Partial Monitor Mode
...
Water Pump
Removal and Installation
1. Disconnect the battery ground cable.
2. Drain the coolant. For additional information, refer to Supercharger Cooling
System Draining,
Filling and Bleeding in this section.
3. Remove the retainer and position the inner fender well ...