Ford Mustang (1999-2004) Service Manual: Oil Pump Screen and Pickup Tube
Removal and Installation
1. Remove the oil pan (6675). For additional information, refer to Oil Pan in this section.
2. Remove the oil pump screen cover and tube (6622) and discard the gasket.
1. Remove the nut.
2. Remove the two bolts.
3. Remove the oil pump screen cover and tube.
4. Remove and discard the gasket.
3. To install, reverse the removal procedure.
Flexplate
Removal and Installation
1. Remove the transmission.
2. Remove the six bolts retaining the flexplate to crankshaft, and remove
the flexplate.
3. To install, reverse the removal procedure. ...
Other materials:
Supercharger Belt Idler Pulley
Removal and Installation
1. Remove the supercharger drive belt cover.
2. Rotate the supercharger belt tensioner clockwise and remove the
supercharger belt.
3. Remove the bolt and the supercharger belt idler pulley.
4. To install, reverse the removal pro ...
Flexplate
Removal and Installation
1. Remove the transmission. For additional information, refer to Section.
2. Remove the six bolts retaining the flexplate to crankshaft, and remove the
flexplate.
3. To install, reverse the removal procedure.
Tighten the bolts in ...
Inspection and Verification
1. Road test.
Verify the customer's concern by performing a road test on a smooth
road.
2. Inspect tires.
Check the tire pressure with all normal loads in the vehicle and the
tires cold. For
additional information, refer to the vehicle certification ...
