Ford Mustang (1999-2004) Service Manual: Output Shaft
Special Tool(s)
Remover, Drive Pinion Bearing Cone 205-D002 (D79L-4621-A) or equivalent | |
Installer, Drive Pinion Bearing Cone 205-011 (T57L-4621-B) |
Input Shaft and Bearing
Special Tool(s) Remover, Driver Pinion Bearing Cone 205-D002 (D79L-4621-A) or equivalent Installer, Drive Pinion Bearing Cone 205-011 (T57L-4621-B) Remover ...Disassembly
1. Remove the retaining ring above fifth gear. 2. CAUTION: Hand tighten the special tool to prevent gear damage. CAUTION: Support the output shaft while using the press to prevent damage to the sha ...Other materials:
1-2 Accumulator
Removal
1. Compress the 1-2 accumulator cover and remove the accumulator piston
retaining ring.
2. NOTE: Note the location of the 1-2 accumulator springs for
reference during assembly.
Remove the 1-2 accumulator.
1. Remove the 1-2 accumulator cover.
2. ...
Valve Stem to Valve Guide Clearance
Special Tool(s)
Dial Indicator Gauge with
Holding Fixture
100-002 (TOOL-4201-C) or
equivalent
Clearance Gauge, Valve Guide
303-004 (TOOL-6505-E) or
equivalent
NOTE: Valve stem diameter must be within specifications before
checkin ...
Pinpoint Test A: The Air Bag Warning Indicator Is Illuminated Continuously
- RCM
Disconnected, Inoperative or Lost/Low Ignition Feed
Normal Operation
NOTE: During normal operation the air bag indicator will be lit continuously
for 6 seconds after the
ignition switch is placed in the RUN position and after five cycles of a lamp
fault code (LFC) if a fault
exists. Be sure to cycle the ignit ...