Ford Mustang (1999-2004) Service Manual: Parking Brake Cable Tension Release

1. CAUTION: If any component in the parking brake system requires repair or if the rear axle housing (4010) is removed, the cable tension must be released.

Place the parking brake control (2780) in the released position.

2. Remove the console.

3. With an assistant inside the vehicle, raise and support the vehicle.

4. Pull the parking brake cable and equalizer rearward.

Parking Brake Cable Tension Release

5. CAUTION: Do not remove the steel pin until the parking brake cable and equalizer/rear cable and conduits are connected to the parking brake control. Pin removal releases the tension in the ratchet wheel causing the spring to unwind and release tension.

Insert a steel pin through holes in the lever to the ratchet wheel.

Parking Brake Cable Tension Release

    Parking Brake (Diagnosis and Testing)
    Inspection and Verification 1. Verify the customer's concern by operating the parking brake system to duplicate the condition. 2. Inspect to determine if one of the following mechanical or electrica ...

    Parking Brake Control
    Removal 1. CAUTION: If any component in the parking brake system requires repair or if the rear axle housing (4010) is removed, the cable tension must be released. Place the parking brake control (2 ...

    Other materials:

    Personal Safety System
    The Personal Safety System provides an improved overall level of frontal crash protection to front seat occupants and is designed to help further reduce the risk of airbag-related injuries. The system is able to analyze different occupant conditions and crash ...

    Installation
    All vehicles 1. NOTE: Inspect the insulators for wear or damage. Install new insulators if necessary. Install the upper insulator on the spring. 2. Install the lower insulator on the lower arm. 3. Install the rear spring. Make sure the pigtail on the low ...

    Chuckle
    Chuckle that occurs on the coast driving phase is usually caused by excessive clearance between the differential gear hub and the differential case bore. Damage to a gear tooth on the coast side can cause a noise identical to a chuckle. A very small tooth n ...