Ford Mustang (1999-2004) Service Manual: Pilot Bearing
Special Tool(s)
 |
Puller with Slide Hammer 308-001 (T58L-101-B) |
1. Remove the clutch disc and the clutch pressure plate. For additional information, refer to Disc and Pressure Plate-3.8L and 4.6L (2V) Engines or Disc and Pressure Plate-4.6L (4V) Engine in this section.
2. Using the special tool, remove the pilot bearing from the flywheel.
Installation
1. Insert the pilot bearing into the crankshaft.
2. Install the clutch disc and the clutch pressure plate. For additional information, refer to Disc and Pressure Plate-3.8L and 4.6L (2V) Engines or Disc and Pressure Plate-4.6L (4V) Engine in this section.
Disc and Pressure Plate - 4.6L (4V) Engine
Special Tool(s)
Clutch Aligner
308-020 (T74P-7137-K)
Material
Item
Specification
Premium Long Life Grease
XG-1-C
ESA-M1C75-B
1. Disconnect the battery ground cable. ...
Flywheel Ring Gear
Removal
1. Remove the flywheel.
2. WARNING: This procedure should be carried out only by a
correctly equipped and
experienced acetylene torch operator. Tongs must be used or asbestos gloves
wor ...
Other materials:
Removal
1. Disconnect the battery ground cable (14301).
2. Remove the air cleaner outlet tube (9B659).
3. Remove the radiator sight shield (8C291).
4. Remove the coolant recovery reservoir (8A080).
1. Disconnect the hose.
2. Remove the bolts.
3. Remo ...
Evaporative Emissions (Description and Operation)
Component Location
The evaporative emission system:
is equipped with an on-board refueling vapor recovery (ORVR) system.
prevents hydrocarbon emissions from reaching the atmosphere.
stores fuel vapors in the evaporative emission (EVAP) canis ...
Manual Transmission and Clutch (Description and Operation)
The primary function of the clutch is to couple and uncouple engine
power to the transmission upon
driver command. For additional information, refer to Section.
Clutch Disc and Clutch Pressure Plate - 3.8L
Clutch Disc and Clutch Pressure Pl ...
