Ford Mustang Service Manual: Pressure Relief

Fuel System (Description and Operation)

Component Location

 


 

WARNING: Do not smoke or carry lighted tobacco or open flame of any


WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related components. Highly flammable mixtures are always present and may be ignited, resulting in possible personal injury.

The vehicle:

  • uses a returnless fuel system.
  • is equipped with a multiport fuel injection (MFI) system.
  • uses separately controlled fuel injectors (9F593) for each cylinder. The fuel injectors are mounted to the intake manifold.
  • fuel injectors are supplied with pressurized fuel from the fuel pump (9350) through the fuel injection supply manifold (9D280).
  • fuel injection supply manifold is controlled by the electronic fuel delivery module which is enabled by the powertrain control module (PCM) (12A650).

Fuel System

Refer to the Powertrain Control/Emissions Diagnosis (PC/ED) manual.

    Fuel System (Description and Operation)
    Fuel System (Description and Operation) Component Location   WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related components. Hig ...

    Fuel Tank Draining
    Fuel System (Description and Operation) Component Location   WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related components. Hig ...

    Other materials:

    Installation
    Removal Automatic transmission vehicles 1. Remove the flexplate. For additional information, refer to Flexplate in this section. Manual transmission vehicles 2. Remove the flywheel. For additional information, refer to Flywheel in this section. All vehicles ...

    Air Cleaner - 4.6L (2V) and 4.6L (4V)
    Intake Air Distribution and Filtering - Supercharger, Charge Air Cooler The supercharger (SC) is a positive displacement pump. Its purpose is to supply an excess volume of intake air to the engine by increasing air pressure and density in the intake man ...

    Installation
    Removal 1. Remove the center instrument panel register. 2. Remove the screws. 3. Disconnect the connectors. 4. Using the special tool, disconnect the temperature control cable from the control head. 5. Remove the nuts and disconnect the vacuum connecto ...