Ford Mustang (1999-2004) Service Manual: Relay Switch
1. Disconnect the battery ground cable. For additional information, refer to Section.
2. Remove the power distribution box cover.
3. Remove the starter relay from the power distribution box.
Installation
1. To install, reverse the removal procedure.
Starter Drive and Flywheel Ring Gear Inspection
1. Remove the starter motor. For additional information, refer to Starter Motor-3.8L or Starter Motor-4.6L in this section. 2. Check the wear patterns on the starter drive gear and the flywheel r ...Starter Motor - 3.8L
Removal WARNING: When servicing starter motor (11002) or carrying out other underhood work in the vicinity of the starter motor, be aware that the heavy gauge battery input lead at the starter ...Other materials:
Intermediate One-Way Clutch
Intermediate Clutch Cylinder Disassembled View
Disassembly
1. NOTE: One tab that locks the reverse clutch drum into the reverse
sun shell may be removed.
This is done for balancing purposes.
Remove the intermediate one-way clutch.
1. Remove the ...
Removal
1. Disconnect the battery negative cable.
2. Drain the engine cooling system.
3. Remove the RH exhaust manifold. For additional information, refer to Exhaust
Manifold RH in
this section.
4. Remove the lower intake manifold. For additional information, re ...
Evaporative Emission Canister Purge Valve
Removal and Installation
1. WARNING: The evaporative emission system contains fuel vapor
and condensed
fuel vapor. Although not in large quantities, it still presents the
danger of explosion or
fire. Disconnect the battery ground cable from the bat ...