Ford Mustang (1999-2004) Service Manual: Removal
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the rear brake disc (2C026).
4. Remove the differential housing cover (4033) and drain the lubricant. For additional information, refer to Differential Housing Cover in this section.
5. Remove the differential pinion shaft (4211).
1. Remove the differential pinion shaft lock bolt (4241).
2. Remove the differential pinion shaft.
6. CAUTION: Do not damage the rubber O-ring in the axle shaft groove.
Remove the U-washer (4N237).
1. Push the axle shafts (4234) inboard.
2. Remove the U-washer.
7. CAUTION: Damage to the rear brake anti-lock sensor (2C190) may occur if it is not removed before the axle shaft.
Carefully remove the rear brake anti-lock sensor.
8. CAUTION: Do not damage the wheel bearing oil seal.
Remove the axle shaft.
Axle Shaft
...
Installation
1. Lubricate the lip of the wheel bearing oil seal
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford
specification ESAM1C75-
B.
2. CAUTION: Do not damage the wheel bearing oil seal. ...
Other materials:
Supercharger Cooling (Description and Operation)
CAUTION: Some vehicle cooling systems are filled with Motorcraft
Premium Engine
Coolant VC-4-A (in Oregon VC-5, in Canada CXC-10) or equivalent meeting Ford
specification
ESE-M97B44-A (green color). Others are filled with Motorcraft Premium Gold
Engine Cool ...
Emission control system
WARNING: Do not park, idle, or drive your vehicle in dry grass
or other dry ground cover. The emission system heats up the
engine compartment and exhaust system, which can start a fire.
WARNING: Exhaust leaks may result in entry of harmful and
potentially leth ...
Recreational towing
Note: Do not tow with the Shelby GT500 model. It cannot tow a trailer.
Note: Do not exceed the trailer weight for your vehicle configuration
listed in the chart below.
Note: Make sure to take into consideration trailer frontal area. Do not
exceed 12 feet2 (1 ...
