Ford Mustang (1999-2004) Service Manual: Removal
1. Remove the differential assembly from the differential housing. For additional information, refer to Differential Case in this section.
2. CAUTION: Record the torque necessary to maintain rotation of the drive pinion gear through several revolutions prior to removing the pinion flange (4851).
Remove the pinion flange. For additional information, refer to Drive Pinion Flange and Drive Pinion Seal in this section.
3. Force the rear axle drive pinion seal metal flange up. Install gripping pliers and strike with a hammer to remove the seal.
4. Remove the rear axle drive pinion shaft oil slinger (4670).
5. Using the special tool and a soft-faced hammer, drive the pinion assembly out of the outer differential pinion bearing (4621) and remove the drive pinion through the rear of the differential housing (4010).
6. Remove the outer differential pinion bearing.
7. Remove and discard the collapsible spacer (4662).
8. Using the special tool and a suitable press, remove the inner differential pinion bearing (4630).
9. NOTE: Do not remove the pinion bearing cups from the differential housing unless the cups are damaged.
Using the special tools, remove the outer differential drive pinion bearing cup (4616).
10. Using the special tools, remove the inner rear axle pinion bearing cup (4628).
Drive Pinion
Special Tool(s) Adapter for 205-S127 205-105 (T76P-4020-A3) Adapter for 205-S127 205-109 (T76P-4020-A9) Adapter for 205-S127 205-110 (T76P-4020-A10) Adapter fo ...Installation
Using special tool 205-024 NOTE: This is the preferred method for installing the pinion bearing cups. If necessary, proceed to Using special tools 205-153, 205-024, 205-231, and 205-D055 in this proc ...Other materials:
Engine (Assembly)
Special Tool(s)
Slide Hammer
307-005 (T59L-100-B)
Remover Adapter, Vibration
Damper
303-176 (T82L-6316-B)
Installer, Crankshaft Front Seal
303-474 (T94P-6701-AH)
Replacer, Steering Pump
Pulley
211-009 ...
Oil Pan
Special Tool(s)
Compressor, Coil Spring
204-D001 (D78P-5310-A)
Lifting Bracket, Engine
303-D088 (D93P-6001-A2)
3-Bar Engine Support Kit
303-F072
Material
Item
Specification
Metal Surface Cleaner
F4 ...
Auxiliary input jack
WARNING: Driving while distracted can result in loss of vehicle
control, crash and injury. We strongly recommend that you use
extreme caution when using any device that may take your focus off
the road. Your primary responsibility is the safe operation of your ...