Ford Mustang Service Manual: Removal

Removal

1. Disconnect the battery ground cable.

2. Remove the air cleaner outlet pipe.

3. Remove the radiator sight shield.

4. Remove the coolant recovery reservoir.


4. Remove the coolant recovery reservoir.

1. Disconnect the hose.

2. Remove the bolts.

3. Remove the coolant recovery reservoir.

5. Install the special tool.


5. Install the special tool.

6. Install the special tool.


6. Install the special tool.

7. Install the special tool.


7. Install the special tool.

8. Raise and support the vehicle.


8. Raise and support the vehicle.

9. Remove the LH engine mount nut.

10. Remove the RH engine mount nut.


10. Remove the RH engine mount nut.

11. Lower the vehicle.


11. Lower the vehicle.

12. Raise the engine.

13. Raise and support the vehicle.


13. Raise and support the vehicle.

14. Remove the oil pan drain plug and drain the engine oil.

15. Remove the starter motor.


15. Remove the starter motor.

16. Position the wiring harness bracket aside.

17. Remove the transmission lower bolts.


17. Remove the transmission lower bolts.

18. Remove the oil pan bolts.


18. Remove the oil pan bolts.

19. Position a safety stand under the subframe crossmember.


19. Position a safety stand under the subframe crossmember.

20. Remove the four subframe lower bolts.


20. Remove the four subframe lower bolts.

21. Remove the two subframe upper bolts.


21. Remove the two subframe upper bolts.

22. NOTE: Do not completely remove these bolts.


22. NOTE: Do not completely remove these bolts.

Loosen the two bolts.

23. Lower the front subframe.


23. Lower the front subframe.

24. Remove the oil pan.


24. Remove the oil pan.

Installation


    Oil Pan
    Engine Component View Cylinder Heads and Valve Train Components   Engine Front Cover Components   Engine Components   Cylinder Block and Lower End Components   Engi ...

    Installation
    Removal 1. Disconnect the battery ground cable. 2. Remove the air cleaner outlet pipe. 3. Remove the radiator sight shield. 4. Remove the coolant recovery reservoir. 1. Disconnect the hos ...

    Other materials:

    Convertible Top Material
    Convertible Top (Description and Operation)   Rear Window Glass Assembly The convertible top assembly is equipped with a rear window glass assembly. The rear window glass assembly is permanently attached to the folding top rear window curtain ...

    Symptom Chart
    Inspection and Verification WARNING: A vehicle equipped with a Traction-Lok differential will always have both wheels driving. If, while the vehicle is being serviced, only one wheel is raised off the ground and the rear axle is driven by the engine, the whe ...

    Cylinder Heads (Removal)
    Engine       A modular engine is built around four modules: the intake module the cylinder head module (RH) the cylinder head module (LH) the lower engine module While not all repairs can take advantage of the modular conc ...