Ford Mustang (1999-2004) Service Manual: Removal
Automatic transmission vehicles
1. Remove the flexplate. For additional information, refer to Flexplate in this section.
Manual transmission vehicles
2. Remove the flywheel. For additional information, refer to Flywheel in this section.
All vehicles
3. Using the special tools, remove the crankshaft oil slinger.
4. Using the special tools, remove the crankshaft rear oil seal.
Crankshaft Rear Oil Seal
Special Tool(s) Installer, Crankshaft Rear Oil Seal 303-518 (T95P-6701-DH) Remover, Crankshaft Rear Oil Seal 303-519 (T95P-6701-EH) Installer, Crankshaft ...Installation
All vehicles 1. Using the special tools, install the crankshaft rear oil seal. Lubricate the oil seal using clean engine oil. 2. Using the special tool, install the crankshaft oil slinger. Manu ...Other materials:
Accessory Drive (Description and Operation)
Component Locations- 3.8L
Component Locations-4.6L
...
Toe Adjustment - Front
1. Start the engine and center the steering wheel.
2. Turn the engine off, and hold the steering wheel in the straight forward
position by attaching a
rigid link from the steering wheel to the seat.
3. Check the toe settings. Follow the manufacturer's instr ...
Checking MyKey system status
You can find information about your programmed MyKeys by using the
information display.
MYKEY DISTANCE
Tracks the distance when drivers use a MyKey. The only way to delete
the accumulated distance is by using an admin key to clear your MyKey.
If the distance ...