Ford Mustang (1999-2004) Service Manual: Resistor
Removal
1. Disconnect the connector.
2. Remove the screws.
3. Remove the resistor.
Installation
1. To install, reverse the removal procedure.
Switch
Removal 1. Remove the climate control assembly. For additional information, refer to Control Assembly in this section. 2. NOTE: All three switches are removed the same. Remove the knob. 3. Remove ...Vacuum Control Motor - Air Inlet Duct Door
Removal 1. Remove the instrument panel. 2. Disconnect the vacuum hose. 3. Disconnect the control arm. 4. Remove the vacuum control motor. Remove the screws. Installation 1. To install, reve ...Other materials:
Brake Booster - Vacuum (Description and Operation)
Power Brake Booster
The vacuum type power brake booster (2005):
is a dual diaphragm, vacuum assisted power brake booster
reduces brake pedal force and travel distance.
is located on the LH side of the bulkhead in the engine compartment,
be ...
Removal
CAUTION: Suspension fasteners are critical parts because they affect
performance of vital
components and systems and their failure can result in major service expense. A
new part with
the same part number must be installed if installation becomes necessary. ...
Lamp Switch - Brake Pedal Position (BPP)
Removal
1. Disconnect the battery ground cable.
2. Remove the brake pedal position (BPP) switch.
1. Remove the clip.
2. Remove the retainer.
3. Disconnect the electrical connector.
4. Remove the BPP switch.
Installation
1. NOTE: When the b ...