Ford Mustang (1999-2004) Service Manual: Safety Belt System (Diagnosis and Testing)
Safety Belt System (Description and Operation)
WARNING: All safety belt assemblies include retractors, buckles, front seat belt buckle support assemblies (slide bar, if so equipped), shoulder belt height adjuster (if equipped), child safety seat ...Inspection and Verification
1. Verify the customer's concern by operating the active restraint system to duplicate the condition. 2. Inspect to determine if any of the following mechanical or electrical concerns apply: Visual ...Other materials:
Bypass Tube - Mach I
Material
Item
Specification
Motorcraft Premium Gold
Engine Coolant
VC-7-A (in Oregon VC-7-B)
(yellow color)
WSS-M97B51-
A1
Removal and Installation
1. Remove the air intake scoop and bracket. For additional information, refer
to Sec ...
Transmission Drive Cycle Test
NOTE: Always drive the vehicle in a safe manner according to driving
conditions and obey all traffic
laws.
NOTE: The Transmission Drive Cycle Test must be followed exactly.
Malfunctions must occur four
times consecutively for shift error DTC code to be set, ...
Piston - Pin to Bore Diameter
1. WARNING: Cover the end of the pin bore with a hand or shop rag when
removing
the retainer ring, since it has a tendency to spring out. Wear eye protection.
NOTE: Piston and piston pins are a matched set and should not be
interchanged.
Measure the pisto ...