Ford Mustang (1999-2004) Service Manual: Safety Belt Tongue Rotated on Belt
1. Grasp the belt tongue and pull the belt webbing down to form a loop through the upper (longer and narrower) slot in the tongue.
2. Rotate and fold the belt webbing over itself within the slot to remove the twist.
3. Pull the excess belt webbing back through the upper slot in the belt tongue.
4. Grasp the belt tongue and pull the belt webbing up to form a loop through the low slot in the tongue.
5. Rotate and fold the belt webbing over itself within the slot to remove the twist.
6. Pull the excess belt webbing through the slot.
7. NOTE: Dual slot tongue shown; single slot tongue is similar.
The safety belt tongue should face inward when completed.
Safety Belt Maintenance
WARNING: All safety belt assemblies include retractors, buckles, front seat belt buckle support assemblies (slide bar, if so equipped), shoulder belt height adjuster (if equipped), child safety seat ...Retractor - Front Seat Safety Belt, Coupe
Special Tool(s) Torx Bit, Safety Belt Bolt 501-010 (T77L-2100-A) Removal 1. Remove the quarter trim panel (31012). For additional information, refer to Section. 2. Using the special ...Other materials:
Drive Pinion
Special Tool(s)
Adapter for 205-S127
205-105 (T76P-4020-A3)
Adapter for 205-S127
205-109 (T76P-4020-A9)
Adapter for 205-S127
205-110 (T76P-4020-A10)
Adapter for 205-S127
205-111 (T76P-4020-A11)
Adapter for 20 ...
Creating a MyKey
Use the information display to create a MyKey.
For Type 1 information displays:
1. Insert the key you want to program into the ignition.
2. Switch the ignition on.
3. Access the main menu within the information display, and press
SETUP using the information d ...
Supply Manifold
Removal
WARNING: Do not smoke or carry lighted tobacco or open flame of any
type when
working on or near any fuel related components. Highly flammable mixtures are
always present
and can ignite. Failure to follow these instructions can result in personal
in ...