Ford Mustang (1999-2004) Service Manual: Speed Control (Diagnosis and Testing)
Refer to Wiring Diagrams Cell 31 , Speed Control for schematic and connector information.
Special Tool(s)
 |
Worldwide Diagnostic System (WDS) 418-F224, New Generation STAR (NGS) Tester 418-F052, or equivalent diagnostic tool |
 |
73 Digital Multimeter or equivalent 105-R0051 |
 |
Breakout Box, EEC-V Control System 418-049, or equivalent 014-00950 |
Speed Control
Torque Specifications
Speed Control
The speed control system consists of the following components:
speed control actuator cable (9A825)
deactivator switch
output shaft sensor (OSS)
speed control ...
Principles of Operation
The speed control system is designed to maintain vehicle speed above 48 km/h
(30 mph). After the
ON switch is depressed, depressing the SET/ACCEL switch will activate the speed
control servo. To
inc ...
Other materials:
Oil Filter Adapter
Material
Item
Specification
Super Premium SAE 5W-20
Motor Oil
XO-5W20 QSP or equivalent
WSS-M2C153-
H
Premium Engine Coolant
VC-4A (In Canada CXC-10; In
Oregon VC-5) or equivalent
ESE-M97B44-
A
Removal and Installation
1. ...
Tracing Powder
Tracing powder is used to check both the uniformity of contact and the
tension of a seal against its
sealing surface. These tests are usually done when a suspected air leak/noise
appears to originate
from the seal area or during the alignment and adjustment ...
Subwoofer Amplifier - Convertible
Removal and Installation
1. NOTE: The convertible top needs to be in the up position to
remove the subwoofer amplifiers.
From inside the luggage compartment, remove the forward panel.
1. Remove the pin-type retainers.
2. Remove the forward pa ...
