Ford Mustang (1999-2004) Service Manual: Spring Lock Coupling
Special Tool(s)
Remover, Refrigerant Coupling Set 412-039 (T84L-19623-B) |
Air Conditioning (A/C) System Check - Retail Procedure
NOTE: This Retail Procedure is not eligible for claiming on Ford paid repairs (warranty and ESP). NOTE: The engine should be run at idle for 10 minutes with the air conditioning on and set to MA ...Disconnect
1. Remove the A/C tube lock coupling clip (19E746), if equipped. 2. Fit the special tool to the spring lock coupling. 3. Push the tool into the cage opening to release the female fitting from the ...Other materials:
Output Shaft and Direct Clutch Cylinder
Special Tool(s)
Compressor, Clutch Spring
307-015 (T65L-77515-A)
Protector, Piston Seal
307-080 (T80L-77234-A)
Protector, Transmission Direct
Clutch Outer Fluid Seal
307-422
Material
Item
Specification
...
Inspection and Verification
NOTE: If any concerns are noted with the speedometer, stoplamps, or
horn, address those concerns
by referring to their associated sections before continuing speed control
diagnosis.
1. Verify the customer concern by operating the speed control system.
2. Vi ...
Main Control Valve Body
Special Tool(s)
Gauge, Transmission Solenoid
Connectors
307-426
Removal
1. Drain transmission fluid and remove the transmission fluid pan and
filter. For additional
information, refer to Fluid Pan, Gasket and Filter .
2. CAUTION: Do not ...