Ford Mustang (1999-2004) Service Manual: Starting System (Diagnosis and Testing)

Starting System (Description and Operation)

Starter Motor The starter motor is a 12-volt unit that has the starter solenoid mounted on the drive end housing and functions as follows: The current flows through the solenoid energizing coil unt ...

Inspection and Verification

WARNING: When servicing starter motor or carrying out other underhood work in the vicinity of the starter motor, be aware that the heavy gauge battery input lead at the starter solenoid is "electric ...

Other materials:

Accessory Drive Belt Tensioner - 4.6L (2V) and (4V)
Removal and Installation Mach I 1. Remove the air intake scoop. For additional information, refer to Section. Cobra 2. Remove the supercharger drive belt cover. 3. Rotate the supercharger belt tensioner clockwise and remove the supercharger belt. 4. Remov ...

Starting a gasoline engine
When you start the engine, the idle speed increases, this helps to warm up the engine. If the engine idle speed does not slow down automatically, have your vehicle checked by an authorized dealer. Before starting the engine: • Make sure all occupants have f ...

Manifold Gauge Set Connection
Special Tool(s) R-134a Manifold Gauge Set 176-R032A or equivalent 1. Turn both valves on the R-134a Manifold Gauge Set clockwise to close the low- and highpressure hoses to the center manifold and center hose. 2. Remove the A/C charging valv ...