Ford Mustang (1999-2004) Service Manual: Subwoofer Amplifier - Mach 1000
Removal and Installation
1. Remove the subwoofer assembly.
1. Remove the two attaching nuts.
2. Remove the screw.
3. Disconnect the electrical connectors.
2. Remove the subwoofer amplifiers.
- Remove the bracket-to-body attaching nuts.
- Disconnect the electrical connectors.
3. To install, reverse the removal procedure.
Subwoofer Amplifier - Convertible
Removal and Installation 1. NOTE: The convertible top needs to be in the up position to remove the subwoofer amplifiers. From inside the luggage compartment, remove the forward panel. 1. ...Antenna
Torque Specifications Antenna The antenna system consists of: antenna mast antenna base and cable antenna lead-in cable The radio antenna uses a two-piece coaxial cable to connect ...Other materials:
Flywheel Ring Gear
Removal
1. Remove the flywheel.
2. WARNING: This procedure should be carried out only by a
correctly equipped and
experienced acetylene torch operator. Tongs must be used or asbestos gloves
worn
when handling the heated flywheel ring gear. Failure to f ...
Pressure
1. Clean all dirt from and remove the brake master cylinder filler
cap and fill the brake master
cylinder reservoir with the specified brake fluid.
2. NOTE: Master cylinder pressure bleeder adapter tools are available
from various manufacturers
of pres ...
Installation
1. CAUTION: To prevent refrigerant system contamination, do not allow
dirt or other
foreign materials to enter the A/C compressor.
Clean the A/C compressor nose area.
2. Place the shaft seal on the special tool. Lubricate the shaft seal and the
special tool ...