Ford Mustang (1999-2004) Service Manual: Supercharger Cooling
General Specifications
a - Use the same type coolant that was drained from the cooling system. Do not mix coolant types.
b - The addition of Motorcraft Cooling System Stop Leak Pellets, VC-6, darkens Motorcraft Premium Gold Engine Coolant from yellow to golden tan.
Torque Specifications
- Supercharger Cooling (Description and Operation)
- Supercharger Cooling (Diagnosis and Testing)
- Supercharger Cooling System Draining, Filling and Bleeding
- Supercharger Cooling System Flushing
- Water Pump
- Radiator
- Degas Bottle
Degas Bottle - 4.6L(2V) and 4.6L(4V)
Removal and Installation 1. Drain the engine coolant from the degas bottle only. For additional information, refer to Cooling System Draining, Filling and Bleeding in this section. 2. Disconnect the ...Supercharger Cooling (Description and Operation)
CAUTION: Some vehicle cooling systems are filled with Motorcraft Premium Engine Coolant VC-4-A (in Oregon VC-5, in Canada CXC-10) or equivalent meeting Ford specification ESE-M97B44-A (green color). ...Other materials:
Supercharger Cooling (Diagnosis and Testing)
Special Tool(s)
Pressure Test Kit
014-R1072 or equivalent
Battery/Antifreeze Tester
014-R1060 or equivalent
Material
Item
Specification
Motorcraft Premium
Engine Coolant
VC-4-A (in Oregon
VC-5, in Canada
C ...
Fuel Pump Module
Removal and Installation
1. Remove the fuel tank. For additional information, refer to Fuel Tank in
this section.
2. NOTE: For installation, tighten the bolts in the sequence shown.
Remove the module assembly flange bolts.
3. Clean the area around the fue ...
Wipers and Washers
General Specifications
Torque Specifications
Wipers and Washers
The wiper and washer system consists of the following components:
windshield wiper mounting arm and pivot shaft
pivot arms
windshield wiper blades
windshield washer reservoir
...