Ford Mustang (1999-2004) Service Manual: Supplemental Restraint System
Torque Specifications
- Air Bag Supplemental Restraint System (SRS) (Description and Operation)
- Air Bag Supplemental Restraint System (SRS) (Diagnosis and Testing)
- Diagnostic Instructions - Air Bag Supplemental Restraint System (SRS)
- Pinpoint Tests - Air Bag Supplemental Restraint System (SRS)
- Inspection and Repair After a Supplemental Restraint System (SRS) Deployment
- Air Bag Disposal - Undeployed Inoperative
- Air Bag Disposal - Driver, Undeployed, Scrapped Vehicle
- Air Bag Disposal - Passenger, Undeployed, Scrapped Vehicle
- Supplemental Restraint System (SRS) Deactivation and Reactivation
- Weld Nut Repair - "J" Nut, Restraints Control Module (RCM)
- Weld Nut Repair - Missing Weld Nut, Restraints Control Module (RCM)
- Weld Nut Repair - Stripped Weld Nut, Restraints Control Module (RCM)
- Restraints Control Module (RCM)
- Driver Air Bag Module
- Passenger Air Bag Module
- Clockspring
Safety Belt Buckle - Rear Seat
Removal 1. Remove the rear seat cushion. 2. Remove the bolt and the safety belt buckle. Installation 1. NOTE: LH and RH rear seat safety belt buckles have different anchor plates. Make sure correc ...Air Bag Supplemental Restraint System (SRS) (Description and Operation)
The air bag supplemental restraint system (SRS) is designed to provide increased collision protection for front seat occupants in addition to that provided by the three-point safety belt system. Saf ...Other materials:
Pinpoint Test H: LFC 32/DTC B1932 - Driver Air Bag Circuit Resistance High
Normal Operation
The restraints control module (RCM) monitors the resistance for the
driver air bag ignitor by measuring
the resistance between pins 3 and 4. If the RCM detects high resistance
between these pins, it will
store a diagnostic trouble code ...
Installation
1. Align the blend door driver to the full heat position.
2. Place the temperature control knob in the full WARM position.
3. Attach the cable drive to the control head.
4. Rotate the knob back and forth from full WARM to full COOL.
5. Check the cable ...
Torque Converter (Description and Operation)
The torque converter transmits and multiplies torque. The torque
converter is a four-element device:
impeller assembly
turbine assembly
reactor assembly
clutch and damper assembly
The standard torque converter components operate as follo ...