Ford Mustang (1999-2004) Service Manual: Toe Adjustment - Front
1. Start the engine and center the steering wheel.
2. Turn the engine off, and hold the steering wheel in the straight forward position by attaching a rigid link from the steering wheel to the seat.
3. Check the toe settings. Follow the manufacturer's instructions.
4. Remove the clamps.
5. Loosen the nuts.
- Clean and lubricate the nut(s) and front wheel spindle tie-rod threads.
6. NOTE: Do not allow the steering gear bellows to twist when the front wheel spindle tie-rod (3280) is rotated.
Rotate the front wheel spindle tie-rods.
7. Tighten the nuts.
8. Install the clamps.
9. Recheck the toe settings. Follow the manufacturer's instructions.
Camber Adjustment - Rear
1. Loosen the nut.
2. Rotate the bolt and the cam to the correct camber setting.
3. Tighten the nut while holding the bolt and the cam stationary.
4. Recheck the wheel alignment. Follow the manu ...
Toe Adjustment - Rear
1. Loosen the nuts.
To prevent damage to the ball joints, hold the tie-rod ends while
loosening the nuts.
2. Rotate the toe link to the correct toe setting.
3. Tighten the nuts.
To ...
Other materials:
Manual Transmission and Clutch (Description and Operation)
The primary function of the clutch is to couple and uncouple engine
power to the transmission upon
driver command. For additional information, refer to Section.
Clutch Disc and Clutch Pressure Plate - 3.8L
Clutch Disc and Clutch Pressure Pl ...
Changing the vehicle battery
WARNING: Batteries normally produce explosive gases which
can cause personal injury. Therefore, do not allow flames, sparks
or lighted substances to come near the battery. When working near the
battery, always shield your face and protect your eyes. Always pro ...
2-3 Accumulator
Removal
1. Remove the main control valve body. For additional information, refer to
Main Control Valve
Body in this section.
2. Remove the 2-3 accumulator piston retainer.
3. Remove the accumulator piston and spring.
Installation
1. Install the 2-3 accum ...
