Ford Mustang (1999-2004) Service Manual: Trim Panel - Package Tray
Special Tool(s)
 |
Torx Bit, Safety Belt Bolt 501-010 (T77L-2100-A) |
Removal and Installation
1. Remove the screw and the coat hook.
2. NOTE: Inspect the shoulder safety belt guide cover for damage. If the shoulder safety belt guide cover is damaged or the cover does not remain closed, install a new shoulder safety belt guide cover.
Open the safety belt cover.
3. Using the special tool, remove the front safety belt guide bolt and position the safety belt guide aside.
4. Position the upper trim panel aside.
5. Lower the seat backrests.
6. Remove the bolts and the rear seat backrest bolster.
7. Remove the two pin-type retainers and the package tray trim panel.
8. To install, reverse the removal procedure.
Trim Panel - Upper Quarter
Special Tool(s)
Safety Belt Bolt Bit
501-010 (T77L-2100-A)
Removal and Installation
1. Remove the rear seat cushion.
2. Using the special tool, remove the rear safety belt anchor ...
Headliner
Removal
1. Remove the two upper quarter panels. For additional information,
refer to Trim Panel-Upper
Quarter in this section.
2. Remove the two windshield side garnish mouldings.
3. Remov ...
Other materials:
Exterior Lighting
Torque Specifications
Exterior Lighting
The exterior lighting system consists of the following components:
headlamps (13008)
parking lamps
rear lamps (13404)
high mounted stoplamp
license lamps
front turn lamps
reversing lamps
fog ...
Intermediate One-Way Clutch
Intermediate Clutch Cylinder Disassembled View
Disassembly
1. NOTE: One tab that locks the reverse clutch drum into the reverse
sun shell may be removed.
This is done for balancing purposes.
Remove the intermediate one-way clutch.
1. Remove the ...
Driveline System
Special Tool(s)
Clamp Plate
205-320 (T92L-4851-C)
Clutch Housing Alignment
Adapter
308-021 (T75L-4201-A)
Companion Flange Holding
Tool
205-126 (T78P-4851-A)
Companion Flange Runout
Gauge
205-319 (T92 ...
