Ford Mustang (1999-2004) Service Manual: Typical Vehicle Emission Control Information (VECI) Decal
The Vehicle Emission Control Information (VECI) decal shows:
- the components of the emission control system.
- the correct vacuum hose routing.
- the color stripe of the vacuum hoses.
The PCV system uses the intake manifold vacuum to ventilate the crankcase and return the fumes to the intake manifold for combustion.
Engine Emission Control (Description and Operation)
CAUTION: Do not remove any part of the engine emission control system.
Operating the
engine without the engine emission control system will reduce fuel economy and
engine
ventilation. This will weak ...
EGR System Components
The EGR system returns a portion of the exhaust gas to the intake manifold to
reduce the combustion
temperature. This results in lower nitrous oxide formation.
The powertrain control modul ...
Other materials:
Installation
1. CAUTION: Do not allow grease, oil, brake fluid or other
contaminants to contact the
pad lining material. Do not install contaminated pads.
NOTE: Install all hardware supplied with pad kits.
Install the pads.
1. Install the new pad slippers. ...
Camber Adjustment - Rear
1. Loosen the nut.
2. Rotate the bolt and the cam to the correct camber setting.
3. Tighten the nut while holding the bolt and the cam stationary.
4. Recheck the wheel alignment. Follow the manufacturer's instructions.
Adjust as necessary. ...
Fuel Tank Draining
Special Tool(s)
Fuel Storage Tanker
164-R3202 or equivalent
Fuel Tank Drain Hose
310-F013
WARNING: Do not smoke or carry lighted tobacco or an open flame of any
type when
working on or near any fuel-related components. Highly fla ...
