Ford Mustang (1999-2004) Service Manual: Underbody Misalignment Check
Underbody Dimensions
1. Underbody dimensions tolerances are +- 3.175 mm (0.125 in). Reference dimensions are not controlled dimensions. Reference points are +- 4.76 mm (0.1875 in). All underbody dimensions are detailed to the centerline of existing holes in the underbody assembly.
2. Inspect all unibody structural members for cracks, twists or bends. Check all welded connections for cracks. Inspect support brackets for looseness.
Frame and Mounting
Frame and Body Mounting
Torque Specifications
Frame Assembly
Underbody misalignment can affect front and rear wheel alignment, the
operation of the suspension
parts and drivetrain operation. Window ...
Front Subframe - 3.8L Engine
Special Tool(s)
3-Bar Engine Support Kit
303-F072
Lifting Bracket Set, Engine
303-D095 (D94L-6001-A) (014-
00792)
Removal and Installation
All vehicles
1. Remove the st ...
Other materials:
Transmission Cooling
Inspection and Verification
WARNING: Never remove the radiator cap under any conditions while the engine
is
operating. Failure to follow these instructions could result in personal injury
and/or damage to
the cooling system or engine. To avoid having scaldin ...
Powertrain/Drivetrain Mount Neutralizing
WARNING: The electrical power to the air suspension system must be shut
off prior to
hoisting, jacking or towing an air suspension vehicle. This can be accomplished
by turning off
the air suspension switch. Failure to do so can result in unexpected inflation ...
Wheels and Tires
General Specifications
Torque Specifications
Description
Nm
lb-ft
Wheel nuts
129
95
...
