Ford Mustang (1999-2004) Service Manual: Valve Cover RH
Material
Item | Specification |
Silicone Gasket and Sealant F7AZ-19554-EA or equivalent | WSE-M4G323-A4 |
Removal and Installation
1. Remove the air cleaner outlet tube. For additional information, refer to Section.
2. Disconnect the fuel line. For additional information, refer to Section.
3. Separate the engine wiring harness from the valve cover studs.
4. Separate the engine wiring harness from the valve cover studs.
5. Remove the positive crankcase ventilation (PCV) hose from the valve cover and position aside.
6. Raise and support the vehicle. For additional information, refer to Section.
7. Remove the bolt and position the transmission filler tube aside.
8. Remove the bolts, studs and the valve cover in the sequence shown.
- Clean and inspect the sealing surfaces.
9. NOTE: Apply an eight millimeter bead of silicone gasket and sealant at the intersection of the engine front cover and the cylinder head.
To install, reverse the removal procedure.
Installation
1. Install the intake manifold and gaskets, tighten the bolts in the sequence shown. 2. NOTE: The O-ring is to be installed on the top of the thermostat. Install the water thermostat and the O-rin ...Valve Cover LH
Material Item Specification Silicone Gasket and Sealant F7AZ-19554-EA or equivalent WSE-M4G323-A4 Removal and Installation 1. Position the oil level tube (6754) out of the way. 2 ...Other materials:
Disassembly
1. WARNING: To avoid risk of serious personal injury, follow all
warnings, cautions,
notes and instructions in the driver air bag removal and installation procedure.
Remove the steering column (3C529). For additional information, refer to Column
in this
s ...
Supercharger Cooling
General Specifications
a - Use the same type coolant that was drained from the cooling system.
Do not mix coolant types.
b - The addition of Motorcraft Cooling System Stop Leak Pellets, VC-6,
darkens Motorcraft Premium
Gold Engine Coolant from yell ...
Bulb - Headlamp
Removal
WARNING: The halogen bulb contains gas under pressure. The bulb may
shatter if the
glass envelope is scratched or if the bulb is dropped. Handle the bulb only
by its base. Grasp
the bulb only by its base. Avoid touching the glass envelope.
NOT ...