Ford Mustang (1999-2004) Service Manual: Valve - Springs, Retainer and Valve Stem Seal
Special Tool(s)
|
|
Compressor, Valve Spring 303-452 (T93P-6565-AR) |
 |
Installer, Valve Stem Oil Seal 303-383 (T91P-6571-A) |
 |
Compressor, Valve Spring 303-567 (T97P-6565-AH) |
 |
Spacer, Valve Spring Compressor 303-382 (T91P-6565-AH) |
Installation
1. CAUTION: Timing chain procedures must be followed exactly or damage
to the
pistons or valves will result.
Compress the tensioner plunger, using a soft-jawed vise.
2. Install a retaining clip on ...
Removal
1. Remove the roller followers. For additional information, refer to Roller
Followers in this section.
2. Remove the spark plugs. For additional information, refer to Section .
3. Position the pist ...
Other materials:
Gear (Removal and Installation)
Special Tool(s)
Teflon Seal Replacer Set
211-D027 (D90P-3517-A) or
Equivalent
Tie Rod End Remover
211-001 (TOOL-3290-D)
Removal
1. Turn the steering wheel as necessary to position the wheels in the
straight-ahead position. Do
not loc ...
Identification Tags
All vehicles are equipped with a Vehicle Certification Label, located
on the driver side door lock post.
For correct transmission identification, refer to the code in the space
marked TR.
For model, service ID level or build date information, refer ...
Striker Adjustment
NOTE: After adjusting the door latch striker plate, verify that the
door can be closed easily and fits
tightly.
1. Loosen the door latch striker plate bolts.
2. Reposition the door latch striker plate from side to side or up and down
as necessary.
...
