Ford Mustang Service Manual: Wheel Studs

Wheel Studs

Removal

1. Remove the wheel hub (1104). For additional information, refer to Wheel Hub and Bearing in this section.

2. Using a press, remove the wheel stud (1107) from the wheel hub.

Installation


Installation

1. Using a press, install a new wheel stud.

2. Install the wheel hub. For additional information, refer to Wheel Hub and


2. Install the wheel hub. For additional information, refer to Wheel Hub and Bearing in this section.

    Front Suspension
    Torque Specifications ...

    Wheel Hub and Bearing
    Wheel Studs Removal 1. Remove the wheel hub (1104). For additional information, refer to Wheel Hub and Bearing in this section. 2. Using a press, remove the wheel stud (1107) from the wheel hub. In ...

    Other materials:

    Ignition Switch Lock Cylinder - Non-Functional
    Steering Column (Description and Operation)   NOTE: All fasteners are important because they can affect the performance of vital parts and systems. Incorrect installation of the fasteners can result in major repair expenses. They must be installed ...

    Knock
    Bearing Whine Bearing whine is a high-pitched sound similar to a whistle. It is usually caused by worn/damaged pinion bearings, which are operating at driveshaft speed. Bearing noise occurs at all driving speeds. This distinguishes it from gear whine which ...

    Convertible Top (Diagnosis and Testing)
    Convertible Top (Description and Operation)   Rear Window Glass Assembly The convertible top assembly is equipped with a rear window glass assembly. The rear window glass assembly is permanently attached to the folding top rear window curtain ...