Ford Mustang (1999-2004) Service Manual: Window Glass - Door
Removal
1. Remove the door trim panel. For additional information, refer to Section.
2. Remove the interior weatherstrip.
3. Remove the bolts and the stabilizers.
4. Remove the bolts and the upstop brackets.
5. Remove the rivet and the exterior weatherstrip.
6. Remove the rivets.
7. Tip the front of the glass down to clear the door filler and remove the door window glass.
Installation
1. To install, reverse the removal procedure.
Installation
Convertible
1. For installation of the back window glass, refer to Section.
Coupe
CAUTION: After installing the urethane installed back window
glass, the vehicle should
not be driven until ...
Window Glass - Quarter
Removal
1. Remove the quarter trim panel. For additional information, refer
to Section.
2. Remove the roof side trim moulding. For additional information, refer
to Section.
3. Remove the ...
Other materials:
Valve Springs
Special Tool(s)
Compressor, Valve Spring
303-163 (T81P-6513-A)
Material
Removal
1. Remove the LH and the RH valve covers. For additional information,
refer to Valve Cover-LH
and Valve Cover RH in this section.
2. Rotate the crankshaft un ...
Removal
1. Remove the upper intake manifold. For additional information, refer to
Intake Manifold-Upper
in this section.
2. Disconnect the fuel line. For additional information, refer to Section.
3. Remove the coolant by-pass tube. For additional information, refer ...
Condenser Core
Material
Item
Specification
PAG Refrigerant Compressor
Oil (R-134a Systems)
F7AZ-19589-DA (Motorcraft YN-
12-C)
WSH-M1C231-
B
Removal and Installation
NOTE: If an A/C condenser core leak is suspected, the A/C condenser
core must be l ...
