Ford Mustang (2005-2014) Owners Manual: Audible warnings and indicators

Key In Ignition Warning Chime

Sounds when the key is left in the ignition in the off or accessory position and the driver’s door is opened.

Keyless Warning Alert (If Equipped)

Sounds when the keyless vehicle is in RUN and the driver’s door is opened.

Headlamps On Warning Chime

Sounds when the headlamps or parking lamps are on, the ignition is off (the key is not in the ignition) and the driver’s door is opened.

Parking Brake On Warning Chime

Sounds when you have left the parking brake on and drive your vehicle.

If the warning chime remains on after you have released the parking brake, have the system checked by your authorized dealer immediately.

    Warning lamps and indicators
    These indicators can alert you to a vehicle condition that may become serious enough to cause expensive repairs. Many lights will illuminate when you start your vehicle to make sure they work. If any ...

    Other materials:

    Cylinder Block Core Plug Replacement
    Special Tool(s) Slide Hammer 100-001 (T50T-100-A) Material 1. Use a slide hammer or tools suitable to remove the cylinder block core plug. 2. Inspect the cylinder block plug bore for any damage that would interfere with the correct sealing ...

    Removal
    CAUTION: Since the engine is not free-wheeling, if the crankshaft or the camshafts are moved in any manner during removal and installation, the crankshaft and the camshafts must be re-synchronized. 1. Remove the engine front cover. For additional informatio ...

    Cylinder Head Temperature (CHT) Sensor - 3.8L
    Removal 1. Disconnect the battery ground cable. For additional information refer to Section. 2. Disconnect the cylinder head temperature sensor connector. 3. Remove the CHT sensor. Installation 1. To install, reverse the removal procedure. ...