Ford Mustang (2005-2014) Owners Manual: Technical specifications

    Drivebelt routing
    1. The short drivebelt is on the first pulley groove closest to engine. 2. The long drivebelt is on the second pulley groove farthest from engine. 3.7L V6 engine 5.0L V8 engine ...

    Motorcraft part numbers
    1For spark plug replacement, see your authorized dealer. See Scheduled Maintenance Information for the appropriate intervals for changing the spark plugs. Replace the spark plugs with ones that mee ...

    Other materials:

    Installation
    1. CAUTION: Make sure the hardened washer is installed between the lower suspension arm and bushing and the shock absorber. Failure to do so can result in damage and failure of the lower suspension arm and bushing. NOTE: The toe link bolt and nuts are of a ...

    Engine Coolant Temperature (ECT) Sensor - 4.6L (2V)
    Removal 1. Disconnect the battery ground cable. For additional information, refer to Section. 2. Partially drain the cooling system. For additional information, refer to Section. 3. Disconnect the engine coolant temperature (ECT) sensor (12A648) ...

    Pinion Seal
    Special Tool(s) Installer, Drive Pinion Oil Seal 205-133 (T79P-4676-A) Removal 1. Remove the pinion flange (4851). For additional information, refer to Drive Pinion Flange in this section. 2. Force up the metal flange of the rear axle drive p ...