Ford Mustang (1999-2004) Service Manual: Windshield Glass
Special Tool(s)
![]() |
Rotunda Pneumatic Knife with Offset Blade 107-R1511 or equivalent |
![]() |
The Pumper 164-R2459 or equivalent |
![]() |
Rotunda Interior Auto Glass Cut-Out Knife Kit 164-R2450 or equivalent |
Window Regulator - Power
Removal
1. Remove the door window glass. For additional information, refer to
Window Glass-Door in this
section.
2. Disconnect the electrical connector.
3. Remove the channel.
4. Remove ...
Removal
All vehicles
WARNING: To prevent glass splinters from entering eyes or
cutting hands, wear safety
glasses and heavy gloves when cutting glass from the vehicle.
1. Remove the RH and LH windshi ...
Other materials:
Cylinder Heads (Removal)
Special Tool(s)
Remover, Crankshaft Vibration
Damper
303-009 (T58P-6316-D)
Remover, Crankshaft Front Oil
Seal
303-107 (T74P-6700-A)
Engine Lift Bracket Set
303-DS086 (D93P-6001-A)
Compressor, Valve Sprin ...
Assembly
1. NOTE: Universal joint service kits are to be installed as complete
assemblies only. Do not mix
components from other U-joint kits.
Install the bearing cup.
1. Start a new bearing cup into the driveshaft yoke.
Check the needle bearings for correct po ...
Pinpoint Test H: LFC 32/DTC B1932 - Driver Air Bag Circuit Resistance High
Normal Operation
The restraints control module (RCM) monitors the resistance for the
driver air bag ignitor by measuring
the resistance between pins 3 and 4. If the RCM detects high resistance
between these pins, it will
store a diagnostic trouble code ...



