Ford Mustang (2005-2014) Owners Manual: Interior luggage compartment release

WARNING: Keep vehicle doors and luggage compartment locked and keep keys and remote transmitters out of a child’s reach.

Unsupervised children could lock themselves in the trunk and risk injury. Children should be taught not to play in vehicles.

WARNING: Do not leave children, unreliable adults, or animals unattended in your vehicle. On hot days, the temperature in the trunk or vehicle interior can rise very quickly. Exposure of people or animals to these high temperatures for even a short time can cause death or serious heat-related injuries, including brain damage. Small children are particularly at risk.

Your vehicle is equipped with a release handle that provides a means of escape for children and adults if they become locked inside the luggage compartment.

Adults should familiarize themselves with the operation and location of the release handle.

The handle is located inside the luggage compartment either on the luggage compartment door (lid) or near the tail lamps. It is composed of a material that will glow for hours in darkness following brief exposure to ambient light.

Pull the handle and push up on the luggage compartment door (lid) to open from within the luggage compartment.

    Trunk release
    The remote trunk release button is located on the center console. Press the button to unlatch the trunk. Interior Trunk Control Lockout (Convertible Vehicles Only) This feature disables the interior ...

    Security
    ...

    Other materials:

    Transmission Draining and Filling
    Material Item Specification DEXRON III (ATF) Transmission Fluid XT-2-QDX DEXRON III 1. Remove the drain plug and drain the transmission. Position a suitable drain pan under the transmission. 2. Clean and install the drain plug. 3. N ...

    Inspection and Verification
    WARNING: Never remove the pressure relief cap while the engine is operating or when the cooling system is hot. Failure to follow these instructions can result in damage to the cooling system or engine or personal injury. To avoid having scalding hot coolant ...

    Wheel Hub or Axle Flange Bolt Circle Runout
    NOTE: The brake discs must be removed to carry out all runout measurements. 1. Position the special tool perpendicular to the wheel hub or axle flange bolt, as close to the hub or flange face as possible. Zero the indicator to allow the pointer to deflect ...