Ford Mustang (2005-2014) Owners Manual: Vehicle Care

GENERAL INFORMATION

Your Ford or Lincoln authorized dealer has many quality products available to clean your vehicle and protect its finishes.

Bulb specification chart
Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized D.O.T. for North America and an E for Europe to ensure lamp performance, light brightness and patte ...

Cleaning products
For best results, use the following products or products of equivalent quality: Motorcraft Bug and Tar Remover (ZC-42) Motorcraft Custom Bright Metal Cleaner (ZC-15) Motorcraft Detail Wash (ZC-3-A) Mo ...

Other materials:

Output Shaft Speed (OSS) Sensor
Removal and Installation 1. With the vehicle in NEUTRAL, raise and support the vehicle. 2. Disconnect the electrical connector. 3. Remove the output shaft speed (OSS) sensor. 4. To install, reverse the removal procedure. ...

Bulb
Removal and Installation 1. Remove the floor console. For additional information, refer to Section. 2. Remove the bolts, then position the bezel upward. 3. Remove the bulb socket from the bezel. 4. Remove the bulb. 5. To install, reverse the removal ...

Pinpoint Tests
CAUTION: Before removing and installing the generic electronic module (GEM) or its connectors, disconnect the battery. Failure to follow this caution will result in the GEM storing many erroneous DTCs, and it may exhibit erratic operation after in ...