Ford Mustang (1999-2004) Service Manual: Camber Adjustment - Rear
1. Loosen the nut.
2. Rotate the bolt and the cam to the correct camber setting.
3. Tighten the nut while holding the bolt and the cam stationary.
4. Recheck the wheel alignment. Follow the manufacturer's instructions. Adjust as necessary.
Camber and Caster Adjustment - Front
All vehicles 1. Remove the rivet. Loosen the nuts and bolt. Vehicles requiring camber adjustment 2. Move the front suspension camber adjusting plate (3B391) to the required camber setting. Vehicl ...Toe Adjustment - Front
1. Start the engine and center the steering wheel. 2. Turn the engine off, and hold the steering wheel in the straight forward position by attaching a rigid link from the steering wheel to the seat ...Other materials:
Disassembly
1. Inspect the clutch cylinder thrust surfaces, piston bore and clutch plate
serrations for scores or
burrs. Minor scores or burrs may be removed with a crocus cloth. Install a new
clutch cylinder if
badly scored or damaged.
2. Check fluid passage in the cl ...
Driveline Angle Inspection
Special Tool(s)
Anglemaster II Driveline
Inclinometer
164-R2402 or equivalent
NOTE: An incorrect driveline angle can cause a vibration or shudder.
1. Check the vehicle for evidence or overload or sagging. Check for specified
air pressures
in ...
Ford Extended Service Plan
FORD ESP EXTENDED SERVICE PLANS
PROTECT YOURSELF FROM THE RISING COST OF VEHICLE REPAIRS
WITH A FORD EXTENDED SERVICE PLAN.
SERVICE PLANS (U.S. only)
More than 32 Million Ford and Lincoln owners have discovered the
powerful protection Ford ESP. It is the only ...