Ford Mustang (2005-2014) Owners Manual: Cleaning leather seats

• Remove dust and loose dirt with a vacuum cleaner.
• Clean spills and stains as quickly as possible.
• For routine cleaning, wipe the surface with a soft, damp cloth. For more thorough cleaning, wipe the surface with a mild soap and water solution. In Canada, use Motorcraft® Vinyl Cleaner. Dry the area with a soft cloth.
• If the leather cannot be completely cleaned using a mild soap and water solution, the leather may be cleaned using a commercially available leather cleaning product designed for automotive interiors.
• To check for compatibility, first test any cleaner or stain remover on an inconspicuous part of the leather.
• Do not use household cleaning products, alcohol solutions, oil/petroleum-based leather conditioners, or solvents or cleaners intended specifically for rubber, vinyl and plastics. These products may cause premature wearing or damage to the leather.

    Cleaning the instrument panel and instrument cluster lens
    WARNING: Do not use chemical solvents or strong detergents when cleaning the steering wheel or instrument panel to avoid contamination of the airbag system. Clean the instrument panel and cluster lens ...

    Cleaning the alloy wheels
    Note: Do not use chrome cleaner, metal cleaner or polish on wheels and wheel covers. A clearcoat paint finish coats aluminum wheels and wheel covers. In order to maintain their condition: • Clean ...

    Other materials:

    Removal
    1. Remove the A/C compressor (19703). For additional information, refer to Air Conditioning (A/C) Compressor-3.8L or Air Conditioning (A/C) Compressor-4.6L in this section. 2. Remove the bolt. 1. Hold the A/C disc and hub assembly (19D786) with the special ...

    Starter Drive and Flywheel Ring Gear Inspection
    1. Remove the starter motor. For additional information, refer to Starter Motor-3.8L or Starter Motor-4.6L in this section. 2. Check the wear patterns on the starter drive gear and the flywheel ring gear . If the wear pattern is normal, install the sta ...

    Dual Converter H-Pipe - 4.6L (2V and 4V)
    Removal NOTE: The RH and LH catalytic converters are serviced separately. 1. Raise and support the vehicle. For additional information, refer to Section. 2. CAUTION: When repairing exhaust system or removing the exhaust components, disconnect all heated oxy ...