Ford Mustang (2005-2014) Owners Manual: Clearing all MyKeys

You can clear all MyKeys within the same key cycle as you created the MyKey. If you switch your ignition off, however, you will need to use an admin key to clear your MyKeys.

Note: When you clear your MyKeys, you remove all restrictions and return all MyKeys to their original admin key status at once.

To clear all MyKeys of all MyKey settings, use the information display to do the following: For Type 1 information display settings:

1. Access the main menu of your information display and press SETUP until PRESS RESET TO CLEAR MYKEY displays.
2. Press and release the RESET button. The display will show HOLD RESET TO CONFIRM CLEAR.
3. Press and hold the RESET button for two seconds until ALL MYKEYS CLEARED displays.

For Type 2 information display settings:

1. Access main menu of your information display and select Settings, then MyKey.
2. Scroll to Clear All and press the OK button.
3. Hold the OK button until ALL MYKEYS CLEARED displays .

    Creating a MyKey
    Use the information display to create a MyKey. For Type 1 information displays: 1. Insert the key you want to program into the ignition. 2. Switch the ignition on. 3. Access the main menu within the ...

    Checking MyKey system status
    You can find information about your programmed MyKeys by using the information display. MYKEY DISTANCE Tracks the distance when drivers use a MyKey. The only way to delete the accumulated distance is ...

    Other materials:

    Removal
    1. Remove the upper intake manifold. For additional information, refer to Intake Manifold-Upper in this section. 2. Disconnect the fuel line. For additional information, refer to Section. 3. Remove the coolant by-pass tube. For additional information, refer ...

    Symptom Chart
    NOTE: New speed control diagnostic software is available in Version 12 or higher for the diagnostic tool. When using this software, it is necessary to use Next Generation Speed Control Adapter 007- 00586 with the diagnostic tool. NOTE: Refer to the Wiring Di ...

    Luggage Compartment Lid - Hinge
    Removal 1. Disconnect the electrical connector. 2. Remove the lift cylinder. 3. Remove the luggage compartment lid hinge bolts. 4. NOTE: Remove the sealer around the luggage compartment lid hinge if necessary. Remove the nuts and the luggage compartm ...