Ford Mustang (1999-2004) Service Manual: Pump - CIII
Special Tool(s)
|
|
Teflon Seal Replacer Set 211-D027 (D90P-3517-A) or equivalent |
Removal and Installation
1. Remove the pulley. For additional information, refer to Pulley-CIII Pump in this section.
2. Remove the bolt and bracket.
3. Disconnect the power steering hoses. Remove and discard the seal ring.
4. Remove bolts and the power steering pump (3A674).
5. To install, reverse the removal procedure.
- Using the special tool, install a new seal ring.
6. Fill and leak check the power steering system.
Pump - CII
Special Tool(s)
Teflon Seal Replacer Set
211D027 (D90P-3517-A) or
equivalent
Removal and Installation
1. Disconnect the power steering hose. Remove and discard the seal ring.
2. Di ...
Pulley - CII Pump
Special Tool(s)
Pump Pulley Installer
211-009 (T65P-3A733-C)
Pump Pulley Remover
211-016 (T69L-10300-B)
Removal
1. Remove the drive belt.
2. Using the special tool, remove ...
Other materials:
Suction Accumulator to Compressor Line - 4.6L
Material
Item
Specification
PAG Refrigerant Compressor
Oil (R-134a Systems)
F7AZ-19589-DA (Motorcraft YN-
12-C)
WSH-M1C231-
B
Removal and Installation
NOTE: Installation of a new suction accumulator is not required when
repairing the ...
Engine and Radiator Flushing
Special Tool(s)
Coolant System
Drain/Flush/Fill
164-R3673 or equivalent
Flush Kit
164-R3658 or equivalent
Drain Kit
164-R3662 or equivalent
Material
Item
Specification
Motorcraft Premium Cooling
...
Final assembly
23. Install the differential assembly in the differential housing. For
additional information, refer to
Differential Case in this section.
24. CAUTION: Align the index marks.
CAUTION: Install the driveshaft with new bolts. If new bolts are not available,
a ...
