Ford Mustang (1999-2004) Service Manual: Differential Case
Special Tool(s)
 |
2-Jaw Puller 205-D072 (D97L-4221-A) or equivalent |
 |
Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C) or equivalent |
 |
Gauge, Clutch Housing 308-021 (T75L-4201-A) or equivalent |
 |
Installer, Differential Shim 205-220 (T85L-4067-AH) |
 |
Installer, Differential Side Bearing 205-010 (T57L-4221-A2) |
 |
Step Plate 205-D061 (D83T-4205-C2) or equivalent |
Final assembly
23. Install the differential assembly in the differential housing. For
additional information, refer to
Differential Case in this section.
24. CAUTION: Align the index marks.
CAUTION: Install the d ...
Removal
1. Remove the differential housing cover (4033) and drain the rear axle
(4001). For additional
information, refer to Differential Housing Cover in this section.
2. CAUTION: Reinstall the differentia ...
Other materials:
Hydraulic Control Unit
Removal
1. Disconnect the battery ground cable(14301).
2. Disconnect the anti-lock-brake control module electrical connector.
3. NOTE: The 4 wheel anti-lock brake system (4WABS) with traction
control is shown , the
4WABS without traction control system is ...
Torque Converter Leak Check
Special Tool(s)
Leak Tester, Torque Converter
307-421
1. Clean the outside surface of the torque converter.
2. Install the special tool into the converter hub.
3. WARNING: Always follow correct safety procedures while using press.
Failure t ...
Hydraulic System
Fluid Pump
The transmission uses a gerotor-type design front pump support and gear. The
pump provides the
volume of fluid needed to charge the torque converter, main control assembly,
cooling system and
lube system. Pump pressure is regu ...
