Ford Mustang (1999-2004) Service Manual: Wipers and Washers

General Specifications

General Specifications

Torque Specifications

Torque Specifications

Wipers and Washers

The wiper and washer system consists of the following components:

  • windshield wiper mounting arm and pivot shaft
  • pivot arms
  • windshield wiper blades
  • windshield washer reservoir
  • windshield washer pump
  • windshield wiper motor
  • generic electronic module (GEM)
  • multi-function switch
  • windshield washer nozzle and bracket
Keyless Entry/Computer Operated Locks
Programming -Keyless Entry Remote Transmitter NOTE: All keyless entry remote transmitters (15K601) must be programmed at the same time. NOTE: All previous transmitter identification codes (TIC ...

Wipers and Washers (Diagnosis and Testing)
Refer to Wiring Diagrams Cell 59 , Generic Electronic Module for schematic and connector information. Refer to Wiring Diagrams Cell 81 , Interval Wiper/Washer for schematic and connector in ...

Other materials:

Crankshaft End Play
Special Tool(s) Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C) or equivalent 1. Measure the crankshaft end play. Use a Dial Indicator Gauge with Holding Fixture to measure crankshaft end play. 2. Position the crankshaft t ...

Motorcraft part numbers
1For spark plug replacement, see your authorized dealer. See Scheduled Maintenance Information for the appropriate intervals for changing the spark plugs. Replace the spark plugs with ones that meet Ford material and design specifications for your vehicle, ...

Evaporator Core Housing
Disassembly 1. Remove the evaporator core housing. For additional information, refer to Evaporator Core Housing in this section. 2. Remove the foam weather seal. 3. Remove the screws and remove the heater core. 4. Remove the screws and remove the A/C rec ...