Ford Mustang (1999-2004) Service Manual: Accessory Drive Belt Tensioner - 3.8L
Removal and Installation
1. Remove the drive belt. For additional information, refer to Accessory Drive Belt-3.8L in this section.
2. Remove the belt tensioner.
- Remove the bolt.
3. To install, reverse the removal procedure.
Supercharger Belt
Removal and Installation
1. Remove the supercharger drive belt cover.
2. Rotate the supercharger belt tensioner clockwise and remove the
supercharger belt.
3. To install, reverse the removal proc ...
Accessory Drive Belt Tensioner - 4.6L (2V) and (4V)
Removal and Installation
Mach I
1. Remove the air intake scoop. For additional information, refer to Section.
Cobra
2. Remove the supercharger drive belt cover.
3. Rotate the supercharger belt tensi ...
Other materials:
Installation
1. NOTE: If the oil pan is not secured within four minutes, the
sealant must be removed and the
sealing area cleaned with metal surface cleaner. Allow to dry until there is
no sign of wetness,
or four minutes, whichever is longer. Failure to follow this ...
Convertible Top (Diagnosis and Testing)
Refer to Wiring Diagrams Cell 103 , for schematic and connector
information.
Special Tool(s)
73 III Automotive Meter
105-R0057 or equivalent
Principles of Operation
The convertible top will only operate with the parking brake engaged
...
Air Bag Disposal - Driver, Undeployed, Scrapped
Vehicle
Remote Deployment
WARNING: Always wear safety glasses when repairing an air bag
supplemental restraint
system (SRS) vehicle and when handling an air bag module or safety belt
retractor/pretensioner assembly. This will reduce the risk of injury in
t ...
