Ford Mustang (2005-2014) Owners Manual: Capacities and Specifications
- Engine specifications
- Drivebelt routing
- Technical specifications
- Motorcraft part numbers
- Vehicle identification number
- Vehicle certification label
- Transmission code designation
Technical specifications
Wheel Lug Nut Torque Specifications
WARNING: When a wheel is installed, always remove any
corrosion, dirt or foreign materials present on the mounting
surfaces of the wheel or the surface of the wheel ...
Engine specifications
For Shelby GT500 octane requirements, see the Shelby GT500 Supplement. ...
Other materials:
Brake Caliper - Cobra
Removal
1. Raise and support the vehicle.
2. Remove the tire and wheel assembly.
3. Remove the caliper locating pin E-clip.
4. Remove the caliper locating pin.
5. Remove the front brake flow bolt.
6. Remove the caliper.
7. Remove the brake pa ...
Cable Adjustment
1. NOTE: Make sure that the range selector lever is tight
against the rearward overdrive stop.
Place the transmission range selector lever in the overdrive
position.
2. Raise and support the vehicle. For additional information, refer
to Section.
...
Piston - Pin Diameter
1. Measure the piston pin diameter in two directions at the points shown.
Verify the diameter is
within specification.
Refer to the appropriate section in Group for the procedure.
If out of specification, install new components as necessary. Refer
...
