Ford Mustang (1999-2004) Service Manual: Disc
Removal
1. Remove the rear disc support bracket (2B511). For additional information, refer to Support Bracket in this section.
2. Remove the brake disc (2C026).
Installation
1. Follow the removal procedure in reverse order.
Installation
1. CAUTION: Install the brake pads in full axle sets. Do not install new brake pads on only one side of vehicle. Install the new slipper and brake pads. 2. Position the caliper on the anchor ...Brake Caliper Support Bracket
Removal 1. Raise and support the vehicle. 2. Remove the tire and wheel assembly. 3. CAUTION: Do not allow the rear disc brake caliper (2552) to hang from the rear wheel brake hose (2A442) ...Other materials:
Oil Level Indicator and Tube
Removal and Installation
1. Remove the oil level indicator tube (6754).
Remove the bolt.
Remove the oil level indicator tube.
Remove and discard the oil level indicator tube O-ring.
2. To install, reverse the removal procedure.
...
Pinpoint Test N: DTC B1869 - Air Bag Indicator Inoperative
Normal Operation
The air bag indicator is designed to illuminate for 6 (+/-2) seconds when
the ignition switch is turned to
the RUN position. This initial 6 seconds of illumination is considered
normal operation and is called
proveout of the air bag ind ...
Oil Filter Adapter
Material
Item
Specification
Super Premium SAE 5W-20
Motor Oil
XO-5W20 QSP or equivalent
WSS-M2C153-
H
Premium Engine Coolant
VC-4A (In Canada CXC-10; In
Oregon VC-5) or equivalent
ESE-M97B44-
A
Removal and Installation
1. ...