Ford Mustang (2005-2014) Owners Manual: Interior mirror

WARNING: Do not adjust the mirror when your vehicle is moving.

Note: Do not clean the housing or glass of any mirror with harsh abrasives, fuel or other petroleum or ammonia based cleaning products.

You can adjust the interior mirror to your preference. Some mirrors also have a second pivot point. This lets you move the mirror head up or down and from side to side.

Pull the tab below the mirror toward you to reduce glare at night.

Auto-Dimming Mirror (If Equipped)

Note: Do not block the sensors on the front and back of the mirror.

Mirror performance may be affected. A rear center passenger or raised rear center head restraint may also block light from reaching the sensor.

The mirror will dim automatically to reduce glare when bright lights are detected from behind your vehicle. It will automatically return to normal reflection when you select reverse gear to make sure you have a clear view when backing up.

    Exterior mirrors
    Power Exterior Mirrors WARNING: Do not adjust the mirror while your vehicle is in motion. A. Left mirror B. Off C. Right mirror To adjust your mirrors: 1. Select the mirror you want to adjust. 2. Mov ...

    Sun visors
    Slide-On-Rod Rotate the visor toward the side window and extend it rearward for extra sunlight coverage. Retract the visor before moving it back toward the windshield and storing it. Illuminated Vis ...

    Other materials:

    A/C Compressor and Clutch Assembly
    NOTE: Internal A/C compressor components are not serviced separately. The FS-10 A/C compressor is serviced only as an assembly. The A/C clutch pulley, A/C clutch field coil (19D798) and the shaft seal are serviceable. The FS-10 A/C compressor has the follo ...

    Engine Support Insulators
    Special Tool(s) 3 Bar Engine Support Kit 303-F072 Engine Lift Bracket Set 303-D095 (D94L-6001-A) or equivalent ...

    Supercharger Belt
    Removal and Installation 1. Remove the supercharger drive belt cover. 2. Rotate the supercharger belt tensioner clockwise and remove the supercharger belt. 3. To install, reverse the removal procedure. ...