Ford Mustang (1999-2004) Service Manual: Push Rod
Removal
CAUTION: Mark the components removed for correct location.
1. Remove the rocker arms (6564). For additional information, refer to Rocker Arm in this section.
2. Remove the push rods (6565).
3. Inspect the components. For additional information, refer to Section.
Installation
1. To install, reverse the removal procedure.
Rocker Arm
Removal CAUTION: If removing more than one rocker arm (6564), mark the components removed for correct location. 1. Remove the valve covers. For additional information, refer to Valve Cover-LH ...Valve Springs
Special Tool(s) Compressor, Valve Spring 303-163 (T81P-6513-A) Material Removal 1. Remove the LH and the RH valve covers. For additional information, refer to Valve Cover-LH and V ...Other materials:
Valve Cover RH
Material
Item
Specification
Metal Surface Cleaner
F4AZ-19A536-RA or equivalent
WSE-M5B392-
A
Silicone Gasket and Sealant
F7AZ-19554-EA or equivalent
WSE-M4G323-
A4
PAG Refrigerant Compressor
Oil
F7AZ-19589-DA (Motorcraf ...
Disassembly
Initial disassembly
1. Remove the differential housing cover (4033) and drain the lubricant into
a suitable container.
2. Wipe the lubricant from the internal working parts and inspect the parts for
wear and damage.
3. Using the special tool, measure and n ...
Differential Case and Ring Gear - Conventional
Special Tool(s)
2-Jaw Puller
205-D072 (D97L-4221-A) or
equivalent
Installer, Differential Side
Bearing
205-010 (T57L-4221-A2)
Step Plate
205-D061 (D83T-4205-C2) or
equivalent
...