Ford Mustang (1999-2004) Service Manual: Rear View Mirrors

Torque Specifications

Torque Specifications

Rear View Mirrors

The rear view mirror system consists of the following components:

  • exterior rear view mirror
  • exterior rear view mirror control
  • exterior rear view mirror glass
  • exterior rear view mirror motor
  • interior rear view mirror
  • exterior rear view mirror (Cobra) (manual folding)
Rear Spoiler
Removal and Installation 1. Open the luggage compartment lid. 2. Disconnect the high mounted stoplamp electrical connector. 3. Remove the screws and the nuts. 4. CAUTION: Use care not damge t ...

Rear View Mirrors (Diagnosis and Testing)
Refer to Wiring Diagrams Cell 124 , Power Mirrors for schematic and connector information. Special Tool(s) 73III Automotive Meter 105-R0057 or equivalent Flex Probe Kit ...

Other materials:

Pinion Seal
Special Tool(s) Installer, Drive Pinion Oil Seal 205-133 (T79P-4676-A) Removal 1. Remove the pinion flange (4851). For additional information, refer to Drive Pinion Flange in this section. 2. Force up the metal flange of the rear axle drive p ...

Key Release Button
Removal 1. Disconnect the battery ground cable. 2. Remove the ignition switch lock cylinder. 1. Insert the ignition key into the ignition switch lock cylinder and turn to RUN position. 2. Push the ignition switch lock cylinder release tab with a p ...

Caliper
1. NOTE: It is not necessary to do a complete brake system bleed if only the disc brake caliper (2B120) was disconnected. Place a box end wrench on the disc brake caliper bleeder screw (2208). Attach a rubber drain tube to the disc brake caliper b ...