Ford Mustang (1999-2004) Service Manual: Shield
Removal
1. Remove the brake disc (1125). For additional information, refer to Disc in this section.
2. Remove the brake disc shield (2K004).
1. Drill out three brake disc shield rivets.
2. Remove the brake disc shield.
Installation
1. Install the brake disc shield.
1. Position the shield.
2. Secure with three rivets.
2. Install the brake disc. For additional information, refer to Disc in this section.
Disc
Removal 1. Remove the front disc brake caliper anchor plate (2B292). For additional information, refer to Brake Caliper Anchor Plate in this section. 2. Match mark the hub (1104) and the bra ...Caliper (DISASSEMBLY AND ASSEMBLY)
Disassembly 1. Remove the disc brake caliper (2B120). For additional information, refer to Caliper in this section. 2. Drain the remaining brake fluid from disc brake caliper. 3. Apply lo ...Other materials:
Engine Cooling (Diagnosis and Testing)
Special Tool(s)
Pressure Tester
014-R1072 or equivalent
73III Automotive Meter
105-R0057 or equivalent
Worldwide Diagnostic System
(WDS)
418-F224,
New Generation STAR (NGS)
Tester
418-F052, or equivalent scan ...
Catalyst Monitor Sensor
Special Tool(s)
Socket, Exhaust Gas Oxygen
Sensor
303-476 (T94P-9472-A)
Material
Item
Specification
Penetrating and Lock Lubricant
or equivalent
E8AZ-19A501-
B
Removal and Installation
1. Disconnect the battery ground ...
Anti-Lock Control
Refer to Wiring Diagrams Cell 42 , Anti-Lock Brake for schematic and
connector information.
Special Tool(s)
Worldwide Diagnostic System
(WDS)
418-F224,
New Generation STAR (NGS)
Tester
418-F052, or equivalent scan
tool
73 Digita ...