Ford Mustang (1999-2004) Service Manual: Supercharger Cooling (Diagnosis and Testing)
Special Tool(s)
Pressure Test Kit 014-R1072 or equivalent |
|
Battery/Antifreeze Tester 014-R1060 or equivalent |
Material
Item | Specification |
Motorcraft Premium Engine Coolant VC-4-A (in Oregon VC-5, in Canada CXC-10) | ESE-M97B44-A |
Motorcraft Premium Gold Engine Coolant VC-7-A | WSS-M97B51-A1 |
Motorcraft Cooling System Stop Leak Pellets VC-6 or equivalent | ESE-M99B37-5 except as noted in ES-F65E-19A511- AA |
Supercharger Cooling (Description and Operation)
CAUTION: Some vehicle cooling systems are filled with Motorcraft Premium Engine Coolant VC-4-A (in Oregon VC-5, in Canada CXC-10) or equivalent meeting Ford specification ESE-M97B44-A (green color). ...Inspection and Verification
WARNING: Never remove the pressure relief cap while the engine is operating or when the cooling system is hot. Failure to follow these instructions can result in damage to the cooling system or engi ...Other materials:
Column
Removal and Installation
All vehicles
1. Disconnect the battery ground cable and wait at least one minute to allow
the depletion of the
restraint system backup power supply.
2. WARNING: To avoid the risk of serious personal injury, follow all
warnings,
c ...
Inspection and Verification
CAUTION: Do not hold the steering wheel (3600) at the stops for an
extended amount of
time. Damage to the power steering pump (3A674) will result.
NOTE: Make the following preliminary checks before repairing the
steering system:
1. Verify the customer conce ...
Exhaust System (Description and Operation)
WARNING: The normal operating temperature of the exhaust system is very
high. Never
attempt to repair any part of the system until it has cooled. Be especially
careful when working
around the three way catalytic converter. The temperature of the three way
c ...