Ford Mustang (1999-2004) Service Manual: Interior Trim Codes
The interior trim codes are listed below. The first letter/number is for the interior fabric. The second letter is for the interior color.
- 9 - Quantum/Rhodes cloth (base coupe)
- A - Link weave cloth (Mach One)
- M - Nudo Leather (Cobra)
- T - Lea cloth with vinyl (base coupe/convertible)
- U - Shadow/Twill cloth (GT)
- X - Lea cloth with vinyl (GT)
The interior trim colors are:
- 2 - Medium Graphite
- 2 - Medium Graphite/Midnight Black (Cobra)
- H - Medium Parchment
- H - Midnight Black/Medium Parchment (Cobra)
- R - Midnight Black/Colorado Red (Cobra)
- W - Midnight Black
- Z - Oxford White
Tape/Paint Stripe Codes
- P - White/Gray (tape applique emblem)
- X - Black (hood and body tape stripe) - Mach One
Radio Codes
The radio type codes are:
- 2 - Premium electronic AM/FM stereo with compact disc (CD) player and clock
- 9 - CDX6+, AM/FM stereo with 6-disc compact disc (CD) changer and MACH 460 subwoofer sound system
- Z - AM/FM stereo, dual media (MP3) with compact disc (CD) player
Axle Ratio Codes
The axle ratio is:
- X5 - 3.8L, non-ABS, 3.27 ratio
- Z5 - 3.8L, ABS, 3.27 ratio
- ME - 4.6L, Mach One, 3.55 ratio
- LE - 4.6L, VX, 3.27 ratio
- TE - 3.55 locker (with independent rear suspension) - Cobra
Transmission Codes
The transmission code is:
- 5-Five-speed manual (T5OD/TR3150) - base
- B-Six-speed manual (T56), Cobra
- K-Five-speed manual (TR3650), GT
- U-Four-speed automatic (AODE/4R70W)
Paint Codes
The first set of paint code letters/numbers listed indicate the vehicle
primary body color. The second
set of paint code letters/numbers listed (if applicable) indicate a two-tone or
accent body co ...
Spring Codes
The spring code portion of the vehicle certification (VC) label identifies
both the front and rear springs.
The first letter/number indicates the front spring code. The second
letter/number indic ...
Other materials:
Wheel Bearing Check
1. WARNING: The electrical power to the air suspension system must be
shut off prior
to hoisting, jacking or towing an air suspension vehicle. This can be
accomplished by
turning off the air suspension switch. Failure to do so can result in unexpected
infla ...
Transmission (Removal)
1. Remove the gearshift lever knob.
2. Remove the console panel gearshift plate. Disconnect the cigar lighter
electrical connector, then
lift the gearshift lever boot over the gearshift lever.
3. Remove the bolts and the upper gearshift lever.
4. Remove ...
Drive Pinion Flange and Drive Pinion Seal
Special Tool(s)
2-Jaw Puller
205-D072 (D97L-4221-A) or
equivalent
Holding Fixture, Drive Pinion
Flange
205-126 (T78P-4851-A)
Installer, Drive Pinion Flange
205-002 (TOOL-4858-E) or
equivalent
...
