Ford Mustang (1999-2004) Service Manual: Engine Component View
Cylinder Heads and Valve Train Components
Engine Front Cover Components
Engine Components
Cylinder Block and Lower End Components
Engine (DIAGNOSIS AND TESTING)
Refer to Section for basic mechanical concerns or refer to the Powertrain Control/Emissions Diagnosis (PC/ED) manual for driveability concerns.
Engine - 3.8L
General Specifications
a - 20-200 seconds to leakdown 3.18 mm (0.125 in) with 225 Newtons (50
pounds) load and tappet filled
with leak-down fluid.
Torque Specifications
a - Refer to th ...
Other materials:
Driveline System - General Information
Driveline Angles @ Curb Specifications
All driveshaft and pinion angles point downward.
General Specifications
a: Service refill capacities are determined by filling the axle 6.3 mm (0.25
in [1/4 in]) to 14.3 mm (0.57 in
[5/16 in]) below the bottom of the ...
Caliper (Disassembly and Assembly)
Special Tool(s)
Rear Caliper Piston Adjuster
206-026 (T87P-2588-A)
Rear Caliper Spring
Compressor Set
206-S027 (T87P-2588-B)
Disassembly
1. Remove the rear disc brake caliper (2552). For additional
information, refer to Caliper i ...
Air Cleaner Outlet Pipe - 4.6L (4V)
Removal and Installation
Cobra
1. Disconnect the intake air temperature (IAT) sensor.
All vehicles
2. Disconnect the vacuum hose.
3. Disconnect the breather hose.
NOTE: Cobra shown, Mach I similar.
4. Loosen the clamps and remove the air cleaner outle ...